Linear or corner installation. 208-230 volts single phase or triple phase. Insulated.

• 57 1/2" H x 26 1/2" W x 29 3/4" D
• Hz: 60
• Watt : 10 100
• Phase: 1, Volts: 230, Amp: 44, Circuit breaker: 60
• Phase: 3, Volts: 208, Amp: 25 A, Circuit breaker: 30 A.
• Electronic control board.
• Cycle: 2, 3, 4 and 15 mn.
• Clearance: 15"
• Rack/hr: 60 – 45 – 30
• Rack size: standard 20" × 20"
• Water consumption / cycle: 1/2 gal.

Included accessories:

• 2 baskets for dishes
• 1 general basket
• 2 cutlery containers

• Complete stainless steel construction AISI 304. 18/10.
• Hood with thermal & acoustic insulation.
• Wash & rinse temperature digital thermometers.
• Double wall insulation.
• Wash tank slanted with rounded edges.
• Washing cycles 2, 3, 4 and 15 mn.
• Automatic start.
• Stainless steel upper and lower wash arms.
• Stainless steel upper and lower rinse arms.
• Automatic tank loading.
• Rinse aid dispenser.
• Wash detergent dispenser.
• Door opening safety device.
• Security thermostat.
• Drains by gravity.
• Extractable control panel.
• Integral tank filters.
• 208-230 Volt 1 phase or 3 phase.
• Total rating: 10 300 Watts
• Booster element: 9000 Watts (booster & tank element alternate)
• Booster capacity: 2 gal., 8 l.
• Tank element: 3000 Watts (booster & tank element alternate)
• Tank capacity: 9 gal., 34 l.
• Water inlet: 1/2 pipe with 3/4 male threaded (hose fitting) Must be connected to hot water only. 120-140°F, 50-60°C
• Required drain: L25S: 1 1/2" ABS pipe at floor level. Gravity drain. L25DPS: 1 1/2" ABS at maximum height of 39", 1m. Pumped drain
• Wash temperature: 140°F, 60°C
• Rinse temperature: 180°F, 85°C